Kitchen and Bathroom Design Plans & Ideas

Kitchen & Bathroom and Wardrobes & Closet Design Plans,Kitchen Remodeling,Kitchen Island,Bathroom Vanity,Kitchen & Bathroom Cabinets Exporter,Wardrobe & Closet Supplier and Wholesaler,DIY Kitchen Improvements,Kitchen & Bath Styles,Kitchen Design,Organize Your Wardrobe & Closet,Bathroom Designer and Kitchen Plans by KitchenBathroom™ in China

Archive for July, 2015

Jul-21-15

IMPORTANT FAUCET INSTALLATION NOTICE

posted by Kitchen & Bathroom Designer

IMPORTANT FAUCET INSTALLATION NOTICE

Before using a newly installed faucet, remove the aerator, if applicable. Turn on the water to the faucet and let it flow for 15 seconds. This flushes out sediment in the water line, preventing it from becoming lodged in the faucet valves, which can affect performance and cause damage to the faucet.

FLUSHING WATER LINES
1. Place a towel at the base of the faucet and remove the faucet aerator. If using pliers, place a rag around the aerator to protect the finish.
2. Turn on the cold and hot water, letting the faucet run for 10-15 seconds.
3. Rinse out the aerator, carefully noting the placement of washers inside. Replace the aerator and check water flow. If there is no improvement, continue to Step 4.
4. Close the shut-off valves or turn off your home’s water main, twisting the valves clockwise as far as possible.
5. Turn on the hot and cold faucet taps to release any pressure and excess water. Turn off.
6. With a wrench, remove water lines underneath the faucet, placing the ends in a bucket.
7. Open the shut-off valve or water main and let water flow into the bucket for 15 seconds.
8. Close the shut-off valve or main supply, then reattach the water lines to the faucet.
9. Reopen the valves to restore water to the faucet and check for leaks. Read the rest of this entry »

Tags:
Jul-21-15

WALL ACCENT TILE INSTALLATION INSTRUCTIONS

posted by Kitchen & Bathroom Designer

WALL ACCENT TILE INSTALLATION INSTRUCTIONS

WALL ACCENT TILE
INSTALLATION INSTRUCTIONS

Before you begin, read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages and ensure that none of the required pieces are missing. If
you find damages, do not install.

We recommend consulting a professional if you are unfamiliar with installing tiles. Signature Hardware accepts no
liability for any damage to the tiles or wall, or for personal injury during installation. Read the rest of this entry »

Tags: