build Kitchen cabinet yourself
There is almost nothing that a real craftsman could build yourself. Since the kitchen cabinet is no exception. But before you plunge into the cellar now and get the saw out of the closet, first of all, sit down in peace and make a plan. The material on the right tool to color there to remember much. To the Guide
Preparations for the construction of KITCHEN
Take a large sheet of paper and make a drawing of all parts needed for your kitchen cabinet. In the normal case, seven members and eleven parts with the corresponding screws on your sheet should paper drawn
1.The exact items for your kitchen cabinet should be: head and base plate, two side plates, a back wall, a door and a divider. As attachments should be present: two door closers, a grip, two small stops for the door, two wall hanger and four editions for the gallery floor.
2.If you have recorded all the components you need for the selberbauen, the individual building slabs and Miss mass. To do this you have behaved course advance level in the kitchen and know your wardrobe will be how big should.
3.The attachments can purchase AIE at the hardware store of your trust, just like the wood-based panels. The panels should consist of veneered chipboard, you can cut directly on the ground level. Don’t forget in head and base plate to allow a milling a slot. The Groove should be so wide that she can easily stop then give the back wall.
4.The back wall of the kitchen cabinet is strong cardboard, you buy in the hardware store and cut to allow two millimeters. To connect the individual parts of the kitchen, you need extra long wood screws with flat head. You will find the screws how should it be different in the hardware store of you trust.
5.If you together-have all the parts, you can enter the positions of the closer in the drawing next. Be sure to work carefully. The closer must be attached so that the door is not wrong hangs after installation.
6.Build the closet yourself
Take your base and the two side plates of your future Kitchen at hand. Now, you want to screw the side plates with the base. To drill into the side panels left and right eight millimeter hole. You do the same on the opposite side. The holes have to sit about middle ground or surface. This means that if you then put through a screw, which should hit right in the middle of the plate. These are how much millimeters, you can from the thickness of your plates measure
1.Have you drilled the holes, you can screw the sides with the base. Then slide the back wall in the slot provided for this purpose. Next, you put on the plate and screw them with the side plates. Fold up that is sitting back in the Groove at the plate.
2.To install the gallery floor, need to drill two equally high holes on the respective side plate. Drilling not quite through, only drill to. The requirements of floating floor then simply placed in the four holes and they can be the divider insert.
3.Next to draw the closer on a side wall and screw it. You do the same at the door. Insert the two attacks for the door towards the closer. Next draw on the door handle and screw him. Now your kitchen cabinet is already up and running. Should you want to hang the closet, still the hanger with two screws are attached to the back of the kitchen and ready.
4.This manual is used for the Selberbauen of a simple Kitchen. It is always possible to make more refinements.
You can insert as other separation trays or use other materials. No limit to the imagination.